| ◆ Detection channels: 1-8 (scalable as needed). ◆ 10.1 inch capacitive full touch color screen. ◆ Frequency range: 5 Hz ~ 12 MHz, continuously adjustable, 2-4 independent selectable frequency, multiple mixing unit ； ◆ Gain range: 0.0dB ~ 99.0dB continuously adjustable, step: 0.1dB ； ◆ Gain ratio:(X/Y)0.1～10.0 ◆ SNR ≥ 10dB (up to 30dB);； ◆ Phase rotation: 0 ~ 360 ° continuously adjustable, step: 1； ◆ Adjustable probe drive (excitation) Level:1～16 ； ◆ Filtering factor:0-30000 ◆ Adjustable detection range, the maximum measurement: 10 ~ 10000, step 1 ◆ Hardware amplification factor: 1dB ～ 39.9db, continuously adjustable, step: 1dB; ◆ Various excitation modes: DP / di; differential, absolute and various customized probes can be configured. ◆ Abnormal alarm function of probe (optional according to the model) ◆ It has the function of fast digital balance; ◆ The display mode of solid line and hidden line is flexible and optional; ◆ Hidden display coefficient: 1-400; ◆ Digital filtering: low pass (0hz-2000hz) and high-pass (0hz-2000hz); adopt unique "digital filtering" to effectively suppress field interference signals and ensure the accuracy and stability of detection; ◆ Stability: 16 hours ≤ 2dB; ◆ It has the function of cutting off the end and tail signals and effectively controlling the blind area at the end of the end (supported by peripheral devices); ◆ The alarm time is 10ms-6000ms; ◆ The rate of missing judgment is less than 0%, and the rate of misjudgment is less than 1%; ◆ Flexible selection of internal and external clock (optional); ◆ Real time software / hardware alarm, multiple alarm window modes (round, square, fan-shaped, customized), with alarm and pre alarm functions,; ◆ Setting of non equal amplitude and asymmetric phase alarm area; ◆ Various display modes: impedance, time base, a / B scan, 8-frequency sorting, analog 3D display (optional according to the model); ◆ It can store a large number of testing programs and data; ◆ The eddy current signal can be replayed and expanded to measure the amplitude, phase and digital value of defects; ◆ Background selection of rectangular coordinate system and polar coordinate system; ◆ Automatic formation of test report (including detection quantity, testing personnel, test parameters, qualified number and unqualified number, etc.) (peripheral support is required); ◆ One key switch between Chinese and English operating languages, without additional installation of operating system and online help; ◆ Working temperature: 0 ℃～ + 45 ℃, storage temperature: - 20 ℃～ + 50 ℃, relative humidity: ≤ 85%; ◆ It can display the section diagram of the pipeline in service, the line number of the inspected pipe and the eddy current testing signal (optional); ◆ The cross-sectional drawing of pipeline is graded to form the outline diagram of eddy current testing of in-service pipeline (optional); ◆ Hierarchical statistics of test results (table and histogram display) is convenient for cumulative analysis of test results (optional module); ◆ Optional data analysis system (optional); ◆ Automatic calendar and time display; ◆ Working environment: power supply: AC 220V / 110V; working temperature: - 10 ℃ - + 45 ℃, relative humidity: ≤ 85%; ◆ The battery can work continuously for 6h (depending on the working environment). ◆ Exterior dimension and weight: 280 * 190 * 70mm (L * w * h), weight: < 2.5kg. | 
